Blog and Updates‎ > ‎

Handgun Cleaning Instructions

posted Jul 19, 2011, 11:32 AM by David Natale

Delco Shooting Supply Handgun Cleaning Instructions

 

Pistol

·      Field Strip Pistol as per instructions found in the owner’s manual.

·      Dip brass brush into bore solvent and run the barrel 5 times to loosen dirt.

·      Using a Jag or patch puller run solvent soaked patch through barrel.

·      Run patch with Remington 40X bore scrubber for an extremely deep clean repeat 3-4 times.

·      Run a solvent patch through barrel to remove 40x Bore Scrubber.

·      Run a dry patch if it comes out clean then you are done, if not repeat previous step.

·      Using an old toothbrush with solvent scrub inside of frame and slide.

·      Wipe entire gun clean and lubricate as per manufactures instructions with either a good quality gun grease or oil.

·      Reassemble and check for function

 

 

Revolver

·      Open cylinder and run Solvent soaked bore brush down the barrel and each cylinder at least 5 times.

·      Run patch in cylinder and barrel with Remington 40X bore scrubber for an extremely deep clean repeat 3-4 times.

·      Run a solvent patch through barrel and cylinder to remove Bore Scrubber.

·      Using an old toothbrush with solvent scrub inside the frame and face of the cylinder.

·      Wipe entire gun clean and put one drop of oil on the crane of the cylinder.

Comments